|
Quickstep
|
|
Easy to use CNC software to control stepper motors with your PC
Plot your G code files in 3DNew Teach Mode Writes G Code for you
Convert DXF files into editable G code
Import Excellon drill files for drilling circuit boards
Plot to confirm moves in "Simulation" mode at selectable speeds
Use your PC to control three stepper motors in manual jog or autorun mode
Full acceleration/deceleration for linear, arc and helical moves
Automatic backlash compensation Hardware activated move interrupts
New "PulsePacer" circuit board attachment for ultra-smooth speed
over 50,000 steps/sec on all three axis with version 4 software
Quickstep Now controls three relays for spindle motor, coolant, etc
Home function added for hardware confirmed home position and axis limits
Plot now displays cut path width
|
|
* This is the main screen for importing, editing and plotting your G code files.
* For setup purposes motors on all three axis can be moved by depressing command buttons.
* Any axis can be set to zero or other desired coordinates
* Moves are plotted on screen as they are made while running G code
|